WHAT TO KNOW ABOUT THE HYBRID TABLE SAWS?
Hybrid table saws are basically designed to compete with the high-end contractor table saws in the market. A hybrid table saw is basically the same as a contractor saw just with the inclusion of a stand that is fully enclosed and the fact that the motor is built inside instead of at the back as with the contractor table saws.
As the saying goes, there is always two sides to a coin, for the fact that the hybrid table saw has its motor inside makes it more convenient for use in shops but at the same time makes it hard to move around. A hybrid table saw combines the best features of a portable contractor table saw and those of a cabinet table saw thus enabling the user to save money and to work efficiently using a durable workshop cabinet.
Hybrid table saws come with an enclosed cabinet which helps to improve the collection of dust. The cabinet can either look like the cabinet table saw with a full enclosure from the table top to the floor or it could be a shorter cabinet on legs.
Some hybrid table saws come with cabinet-mounted trunnions while others have cabinet-mounted trunnions and some have table-mounted trunnions, cabinet-mounted trunnions are generally easier to adjust than the table mounted trunnions.
Hybrid saws naturally tend to be heavier than the contractor saws but they are lighter than the cabinet table saws. Some hybrid table saws come with a sliding table thus offering users the ability to improve cross cutting capability.
Hybrid saws drive mechanisms vary way more than that of the contractor table saw and the cabinet table saw. The drive mechanism of the hybrid table saw can be a single v-belt, or multiple v-belts depending on the product you get.
Hybrid saws come with a 1.5 or 20 amp motor, therefore, they have the ability to run on a standard 15 or 20 amp 120 volt American household circuit, while the cabinet table saw has a 3hp, that is, a larger motor that requires a 240 volt supply.
Many of the cabinet table saws on the market comes with additional features like safety guards and features for further safety purposes, features like a quick release system that helps users to use the table saw more easily.
CERTAIN THINGS TO KNOW WHEN USING A HYBRID TABLE SAW?
- To use the hybrid table saws, you just simply have to clamp your material in place and cut through the makings that you have already made in the material, in order for you to realize that perfect cut that you desire. And though we have different products that all vary from one another, but then depending on the product you are using, you just have to follow the manufacturer’s instruction manual.
- You could build a Hybrid Table Saw Workstation. Why? That is in order for you to build on your investment after purchasing the Hybrid Table Saw.
Now, how do you build a Hybrid Table Saw Workstation?
To build a hybrid table saw work station around your saw, you simply have to use wood to create drawers for storage and adapt the workstation to your needs and desires. In addition, you can add wheels underneath the hybrid table saw workstation to provide you ease of use and also so that you can be able to move your work station across the workshop.
- If by chance, your hybrid saw does not come with a storage shelf included underneath the product, you can simply make a shelf by yourself using a simple board of wood and some adhesive hooks. You can also stick adhesive hooks to your saw in order to provide for yourself additional storage for cords and other tools. The hybrid table saw is really adaptive and you can use it in any way you want to and for whatever you want to.
CERTAIN FACTORS TO CONSIDER WHEN BUYING A HYBRID TABLE SAW?
As a woodcutter, the most important investment that you can make is purchasing a hybrid table saw. Buying a hybrid table saw is an expensive investment, therefore, before entering the saw market, you have to know enough about hybrid table saws in order for you to be able to choose the product that best suits your needs. Below are the features and factors that you should have in mind when you are on the market for a hybrid table saw.
- SMOOTH AND ACCURATE CUTTING
The main purpose of opting for a hybrid table saw is to is be able to have smooth and accurate cuts. Therefore, the blade of any hybrid table saw that you have in mind should be good enough to cut into any type of wood without causing the user any trouble at all. The unit should allow you to make rip cuts, beveled cuts, and cross cuts with high precision and accuracy. To achieve this, the meter gauge and the fence must be accurate. If the meter gauge doesn’t meet your needs, it can be replaced.
- THE HORSEPOWER
The horse power is another important feature that plays a great role in determining the worth of the hybrid table saw. If the horsepower is lower than required, then it would not be able to cut through certain materials for certain projects, similarly, a product with more horsepower than required can lead to instability. Instability will lead to loss of accuracy and may even lead to accidents.
- A 1.5 to 2 horsepower motor would attract 18 to 24 amps and would operate on a standard 120V circuit. It can cut through a 2-inch-thick hardwood. If the hardwood is any thicker than that, then it needs more torque.
- A 3 to 5 horsepower motor needs a 240V circuit. It can cut through hard woods that are 3 inches thick or even more. But if the power is increased in any way, there is a high risk of kickback.
- THE RIVING KNIFE
One of the most reported risks in the hybrid table saws is the riving knife. If the product comes with a good quality riving knife, then there is a reduced possibility of kickback. So if you are looking to get yourself a hybrid table saw, make sure to select a hybrid table saw that has the mentioned feature. The riving knife should have the same curve as the blade of the saw. When you rotate lower or raise the blade, the riving knife should maintain its relative position. It is even better if it is a quick release riving knife though this is not a necessary addition. It is preferable to have a riving knife than a splitter for protection against kickback.
- THE FLESH SENSOR
As a woodworker that works with power tools, you understand that safety is one of the most important things to consider while buying any device. The same thing applies when buying hybrid table saws. It advised buying a hybrid saw that has a flesh sensor feature. It would certainly be more expensive but it is an advantageous feature to ensure your safety. The flesh sensor feature has the ability to stop the blade within 0.01 seconds of it coming in contact with the human touch. The blade brake action resulting in the flesh sensor makes the blade drop below the table level. It also makes the motor shut down. So get a hybrid table saw with this feature for your safety.
- EASY ADJUSTMENT
A good hybrid table saw should have a feature that can be used to align the blade with ease. With an easily adjustable blade, you can make smooth and accurate cuts, thereby improving the quality of your work. To be able to comfortably operate the hybrid table saw, the fence position, the bevel and height of the blade should all be adjustable. The machine parts should be easy to lubricate and friction should not occur while adjusting the parts. And even a beginner should be able to adjust the saw without any problem.
- THE DRIVE BELT DESIGN
The drive belt is also an important part of a hybrid table saw. The saw blade and the motor of a hybrid table saw are both connected by a drive belt. The main cause of the vibration produced during operation is the drive belt, therefore it is really important that a hybrid table saw comes with a good drive belt for the stability of the table saw. Poly-V belts should be chosen over regular V belts and wedge belts as it produces less vibration. Hybrid table saws that come with Poly-V belts are great for the smooth running of the saw.
- THE DUST CONTROL
As a woodworker, working without chaos and preventing accidents should be a priority, for that to happen, you need to have a clean environment. Using a hybrid table can result in tons of sawdust. In order to manage this situation, there are two ways, it is either you put a shroud over the blade in order to redirect the dust that is released or you hook up a vacuum to the back. It is also important that you empty the collection bag on a regular basis.
- THE CONSTRUCTION
Have in mind that in a hybrid table saw, the durability and the solidity of the saw are of utmost importance. In order to increase the lifespan of the machine, it is better to go with metal parts other than plastic parts. The ideal material to use is cast iron, however, it is heavy when compared to aluminum or steel. The saw should have sturdy legs and a very flat and smooth surface that you can properly work on. The saw should be able to withstand any condition.
- THE BLADE TILT
Left blade tilt should be chosen over right blade tilt because a left blade tilt is found to cause less kickbacks compared to a right blade tilt.
For almost all cuts, the blade is usually set up at 90 degrees from the table. But in order to make angle cuts and bevel cuts, the blade needs to be tilted at different angles. If you as the machine operator, prefer the blade tilt to cut the wood on angles, then it is better that you choose a left blade tilt because it is safer and better than the right blade tilt. Although, all these depend on your personal preference as the operator.
Below are 5 different criteria with which you might want to base your need for a hybrid saw and 5 best hybrid saws, one for each category;
1) Grizzly G0690 Saw – BEST HYBRID TABLE SAW (TOP PICK) FOR QUALITY
The Grizzly G0690 is a product well known for its performance and quality. It features a triple belt drive with 3HP motor and heavy cast iron trunnions to its majestic wings and its cast iron table. In the world of power tools, this saw is nothing short of a beast.
This saw boasts of a magnetic switch of the highest quality, a camlock T-fence, T-slot miter gauge, heavy cast hand wheels, 4 inch dust collection port, and riving knife. This is a premium standard hybrid table saw that would definitely be the central attraction of any shop it finds itself.
The Grizzly G0690 is a CSA certified saw and it even meets the UL 987standards. This is the evidence that this product is of a very high quality. This 10-inch left tilting hybrid table saw is easy to work with and it squares up smoothly.
Its camlock T-fence has an HDPE face, and the riving knife comes with a blade guard. This product has a quick release feature for the riving knife, the motor guard and the splitter assembly, with this, your safety is ensured while operating the saw.
The easy glide fence system can be adjusted using the knurled knobs, there are also adjustable screws inside with the set screws which hold down the insert of the table. The T-blade is 10 X 40 inch and has an H3308 push stick that makes it easy to use. This product is easy to install.
This 3 HP saw is the perfect tool for cutting 8/4 padauk, maple, or purple heart. If you are planning to move this saw from one jobsite to another, you can make use of a mobile base to move the saw around.
- Heavy cast iron trunnions.
- 3HP motor and triple belt drive.
- Massive cast iron table and wings.
- Camlock T-fence.
- Heavy cast hand wheels.
- Magnetic switch.
- T-slot miter gauge.
- 4” dust collection port.
Pros and Cons
|The quality of the product is top notch.||The dust collection port is not really great.|
|The saw is easy to set up.||The power cord is short.|
|Device is durable.||The saw is easy to set up.|
2) Powermatic PM1000 – BEST HYBRID TABLE SAW FOR WOODWORK
The Powermatic power tool does not require a 220-volt outlet in it to provide sufficient power compared to the other products in the same line. The blade bevel moves at 60 degree letting users make clean compound miter cuts with the most minimal effort. The blade height and depth are both controlled by the stainless steel wheels which can be found both on the front and on the side of the main cabinet assembly. The riving knife, the anti-kickback guard, and the pawls can all be manually adjusted without the use of any tool.
Apart from its versatile ability to cut through woods, the PM1000 also has a blade surround and a collection hose for the extraction of dust. While gathering dust during operation this way, the blade becomes more visible to the operator and at the same time, the air quality in the workplace is improved.
In addition, it comes with a 50-inch Fence that provides exceptional control when ripping lengthy sections of wood. The extended geometry of the table allows the user to easily manipulate longer work pieces. And for craftsmen working at home who can afford to invest in this particular product, the PM1000 is fit for wood shops where you do not need to run a 220-volt outlet from the house into the shop, you can just run your operation at home. It is easier to run operate in smaller spaces, leaving free space for additional tool and bench space.
- A 1-3/4 hp motor.
- A poly-v belt that reduces vibration.
- A superior dust collection power.
- 30” Accu-fence system.
Pros and Cons
|This product runs on 115-volt outlet instead of 220-volt.||PM1000 has a lower horsepower motor.|
|It also has an adjustable bevel that is at 60 degrees with miter gauge.||The base, control wheels and trunnions are not made of cast iron .|
|Incredible durability and high level accuracy.||PM1000 does not have the additional vibration dampening feature.|
|Does not take up much electric power as much as other products in the same category.||The blade guard bolts make contact with the blade sometimes, this is not safe.|
|Easy to set up.||Bad customer service.|
|Among its most rated feature is the Hands free power switch operation.|
3) Grizzly G0715P Saw – BEST HYBRID TABLE SAW (TOP PICK) FOR THE MONEY
This saw is made for contractors who prefer to work with a saw that has the strength of a traditional saw but at the same time weighs less for shop use, you might want to go for the G0715P.
It is a budget but state-of-art table saw that has great safety features and a beautifully designed body and that can be bought with just a fraction of what the average table saw costs. The G0715P has gained a high reputation for being one of the best hybrid table saws for the money.
This table saw is designed in a way that it performs consistently on a day to day basis, this saw makes an easy job out of any type of wood that you use. This table saw is perfect for making cabinets, cutting of floor boards and in the making of crown molding, it does not weigh as much as a standard table saw.
And although this saw does not weigh much, it encompasses a high-end contractor style with the same size as any contractor saw. This saw features a hand crank wheel that is positioned on the front of the cabinet to grant the user total control over the speed and power of the saw. Another amazing feature is the simple push button on the front that has a bright green colour, this helps the operator to know when the saw is coming on.
The G0715P also comes with an emergency stop switch that allows the operator to quickly bring the saw to a complete halt in order to prevent mistakes, accidents and fatal accidents.
Also, there is a dust collection port on the bottom that collects sawdust and other particles in order for your work area to remain safe and neat. The saw also comes included with a riving knife that lets you make shallow cuts without going too deep through the board.
While operating this saw, the operator can easily make a switch between the knife and the blade. Making the switch is actually very easy for the operator and there is also an inclusion of a T-fence guiding system.
This saw features a quick change blade guard, but then, the anti-kick pawls can be positioned away from the workpiece.
Each feature has its own strength that ensures that you as the user have a smooth experience while working with wood and still get a great end product.
- Precision-ground cast-iron table.
- Cast-iron trunnion.
- T-slot miter gauge.
- Camlock T-shaped fence with HDPE face.
- Easy-glide fence system.
- Quick release riving knife and blade guard assembly.
- Knurled knobs and dado blade table inserts.
- Poly-V serpentine belt drive.
Pros and Cons
|It is CSA certified.||Has a tough handle manipulation.|
|Runs a quiet operation.||Problem with the alignment of the blade.|
|Highly accurate and very powerful.||Set up might be a little bit troublesome.|
|The power phasing is interchangeable.||Low quality miter.|
|Has a reckonable fence system.||It needs to be regularly oiled to prevent from rusting.|
|Easy to assemble.|
4) RIDGID R4512 Saw – BEST HYBRID TABLE SAW FOR THE SPEED
For a woodworker that wants a power tool to complete his project faster than ever, the RIDGID is the tool for you, as fast as lightning with a 13-amp motor that produces more than 3,000 revolutions per minute. It has a flat, level surface for cutting without any trouble at all.
Features a base that is made of cast iron, this base is strong enough to support the weight of any wood at all, also the cast iron does an amazing job of absorbing the vibrations produced by the saw, this way, you can make your cuts without feeling your hands vibrate.
As a user, during operation, you have complete access to the braking system and at the same time, the hand wheel.
The hand wheel permits you rotate the front crank in order for you to have more control over the table. The brake system on its part, allows you to put your foot down automatically to the blade thus either avoiding a mistake or an accident in case of contact with the blade.
The surface of the table is even and with that, users can make level cuts with the saw.
RIDGID hybrid table saw comes with rolling casters tucked underneath the saw and inside its cabinet that helps users move the table as easily as possible.
There is also the inclusion of a fencing guard that prevents your fingers from getting in touch with the blade. This table saw provides dimensions of 46.3 x 30.6 x 37.2 inches.
- A 13 amp motor that delivers up to 3450 RPM.
- Cast iron table.
- Front and back clamping aluminum rip fence that has extra-large glides.
- Built-in accessory slots.
Pros and Cons
|13-amp motor.||Difficulty in assembling machine for beginners.|
|Auxiliary accessories support.||A parallel fence and saw set up.|
|The product can be customized.||The product does not come with any extension.|
|Nice fence system.||Not eligible for LSA.|
|Great delivery service.||Bad anti-kickback system.|
5) Shop Fox W1837 – BEST HYBRID TABLE SAWS FOR BEGINNERS
As a woodworker, having the W1837 is like having the best of the contractor table saw and that of the cabinet table saw merged together in one product. This the best hybrid table saw for beginners because despite its amazing features, it is easy to figure out this machine on your own. It has the easy to transport weight and size of a high-end contractor saw and the full features of the cabinet table saw, including a dust control.
This hybrid table saw also has a quick change blade guard and anti-kickback pawls that can be positioned away from the jobsite. This is an awesome piece that will surely draw attention wherever it is used.
The saw comes with an interchangeable quality riving knife that offers protection for non-through cuts which requires you to remove the blade guard.
This hybrid table saw also features a built-in kickstand operated mobile base that is handy. Simply press down on the foot levers and the machine would rise off its otherwise stable feet and then become mobile, that way, you can move it from one jobsite to the other.
And just like every standard cabinet table saw, the W1837 has its trunnions mounted to the cabinet for better performance. The robust cast iron trunnions absorb vibration and ensure a proper blade to fence and meter slot alignment. It also makes the blade height and the angle adjustment easy.
The cabinet bottom is enclosed and has a dust chute with a 4-inch port. This makes your work area free from dust and debris.
The blade of this saw can tilt to the left anywhere from between 0 and 45 degrees and is great for cutting bevels, meters or chamfers. Your cutting angle can easily be adjusted just by loosening the blade tilt lock and then turning the blade tilt handwheel to position the blade at the preferred angle, then, you lock it in place in order to make repeat and consistent angle cuts.
- Enclosed cabinet bottom with a 4 inch dust port.
- A precision ground cast iron table.
- A lift-off precision fence with front and rear locking ability.
- A quick release blade guard assembly.
- Robust cabinet mounted trunnions.
- An in-built foot operated mobility system.
- T-slot miter guage.
- Easy glide fence system.
Pros and Cons
|Easy assembly.||The solid top is not perfectly flat|
|Does not require much adjustment.||The guide does not hold square.|
|Saw functions very well.||Not industrial quality.|
|It works well in small shops.||The manual is not well detailed.|
The utmost wish of any woodworker is to have an incredible machine that can comfortably work with and attain the perfect result. We made our review with this in mind.
All hybrid table saws above are products that possess great power, excellent safety system and even additional features like reasonable power consumption and they are generally affordable for their great features.
With technology advancing each and every day, tools are becoming more powerful, although without any compromise on their accuracy and precision. Better features are being imputed in order to increase their safety of use and to enhance their productivity, therefore the whole process of having to choose the right tool that befits your needs and at the same time is within your budget can be very cumbersome, haven put together the top 5 best hybrid table saws on the market, we very much hope that this article has provided you with all the information that you require to take home the best hybrid saw on the market.