Properly dry your 3D printer filament with JengaLabs Active Dryer. Provides a constant temperature, preventing damage to the filament and deformation of the spool.
Make sure your 3D printing filaments last longer and produce consistent results with the JengaLabs Active Dryer. Properly dries nylon after use, removing both surface and internal moisture.
Proper drying of 3D printing filaments is critical, as almost all thermoplastic materials can absorb moisture. In fact, undried nylon can ooze, bubble, crack, warp and more, ruining your end product.
While you could use a conventional baking oven or heated platen, neither provides hot air circulation. JengaLabs Active Dryer is different.
Dry your strands with 360° air circulation
Innovative airflow and advanced heat exchange mechanism make the JengaLabs Active Dryer different from a conventional oven or hot plate. The technique dries the filament using hot air with 360° air circulation, allowing all surfaces of the filament to dry completely, leaving no missing spots.



Control all parameters with preset or custom profiles
In addition, this 3D printing filament dryer gives you full control over the drying process thanks to its temperature control and humidity monitor. These allow you to customize drying to suit materials or experimental settings.
Otherwise, if you prefer a more streamlined solution, JengaLabs Active Dryer also has preset drying profiles designed for common 3D printing materials. That way you can take all the guesswork out of drying times and temperatures.

Get better results when you use this filament dryer
Has your creation ever bubbled, wrapped, or cracked after printing? Undried filament was the likely culprit. Luckily, drying your filament well can prevent these problems.
Printing with material dried in the JengaLabs Active Dryer actually improves dimensional accuracy and reduces warping and warping due to its high performance drying.
According to the company, this type of high specification drying is important for materials with high hygroscopicity such as nylon, PETG, and engineering and advanced materials.
The company’s Kickstarter page writes that you can almost eliminate the 3D printing failure rate due to material hygroscopicity by drying it with this 3D printing filament dryer, saving you time and material costs. It also prevents jams or clots inside the printer.
Enjoy a modular and flexible filament dryer
The JengaLabs Active Dryer fits right into your creative setup with its sleek, modular design. It includes the Materials Drying Unit (MDU) and the Materials Management Unit (MMU). Both have design elements inspired by vibrant Hong Kong.
The MDU contains the device heater, user interface elements, and airflow, the working components of the machine. And the MMU is a transparent compartment that houses up to 3 spools of 750 grams of filament rolls or 2 spools of 1 or 2 kilograms of filament rolls. You can also stack the MMUs to store multiple materials.
The MMU also features a filament tube adapter that fits 1.75mm, 2.85mm, and 3mm filaments. Finally, the MMU comes with seals and covers that prevent the filaments from absorbing additional moisture as they separate from the MDU.
Bet on an inspired design
We mentioned earlier that this filament dryer has design features that are inspired by bustling Hong Kong. In fact, its neon light effects show the drying status of materials at a glance.
For example, the neon light glows orange when the device is drying, green when the process begins, and blue during the cool down phase. These effects mimic the neon lights on the streets of Hong Kong.
Choose an easy-to-use filament dryer
While an oven, food dehydrator, or heat plate are all viable filament drying options, they don’t balance ease of use, price, and functionality like JengaLabs’ active dryer.
These methods do not circulate air around the filament and are largely uncontrolled. So you never really know what result you will get. They could even warp your filament from overexposure to high temperatures.
Since 3D printing filament is so expensive, why risk damaging it with a dryer that isn’t up to the task?
Read our final thoughts
Do you trust 3D printers for your business or art? Add JengaLabs Active Dryer to your setup. Its innovative airflow and temperature control features will improve your results and save you time and money. Say goodbye to 3D printing errors and extend the life of your filament with this useful dryer.
Pre-order the JengaLabs Active Dryer for around $388 on Kickstarter. Would you love to use this product? Let us know your thoughts in the comments.
Leave a Reply