Creality introduced its new HALOT-MAGE series 8k resin 3D printers at its “Reflect and
Renew” on April 9 of this year, and we are pleased to announce that the printers have launched and are available for purchase at this time.
Read on to find out more about the features of the new HALOT-MAGE range.
Next generation resin printing
The HALOT-MAGE series, which includes HALOT-MAGE and HALOT-MAGE PRO, is Creality’s next generation solution for resin printing. HALOT-MAGE is the basic version featuring a 10.3-inch LCD screen, 8K high resolution and an air purifier, while HALOT-MAGE PRO is the full addition to the series, with a blazing print speed of 170 mm/h, an innovative resin pump and the integral light source 3.0.
This launch of this pair of 8k printers marks a sea change for Creality since it launched its first resin 3D printer in 2015. Having listened to customer wishes, the company has launched the MAGE series in response to user concerns.
Such complaints from previous customers include:
Slow speed: Users have to wait overnight with the risk of printing failure.
Complicated resin recovery: Leftover resin in older machines required messy recovery by hand, with a funnel and filter paper. Resin stains are a nightmare, and chemical irritation is no fun either (speaking from experience).
Irritating resin smell: The stench of resin was annoying.
Cumbersome lid: The cap needed to be removed and then reattached each time resin was added or a print was recovered. It’s a waste of time and takes up extra space.
Limited size and precision: From time to time, the build volume was found to be
too small to make a large model, or the end result was aesthetically unappealing.
So what has Creality done to address these concerns? Have a look!
To address the issue of slow prints, HALOT-MAGE PRO offers a staggering speed of 170mm/h without sacrificing quality. It is 3 to 5 times faster than the competition.
The motion system raises and lowers the build plate steadily in just 1.2 seconds. Now users can produce quality prints in just 1 hour. Magic indeed!
Flawless large 8K prints
The 10.3-inch 8K (7680 × 4320) monochrome LCD features 29.7μm XY resolution and smoother smoothing than the 50μm of a typical 4K printer. The large LCD screen provides a generous 228x128x230mm build volume, giving you more room to create miniatures, prototypes, accessories, and whatever your resin-loving heart desires.
Integral Light Source 3.0
The HALOT-MAGE PRO adopts the 3.0 edition of Integral Light. Light uniformity is above 90%, promising consistent quality throughout the print and allowing for 0.1mm hand-removable microcarriers. The light intensity is up to 8000 μw/cm² and it is capable of curing a layer in 1 second with standard 405nm resin. With the new Integral Light, users can print models with smooth surfaces and sharp contours, without any problems.
Professional flip top “MageArch”
Tired of standing on your toes to lift the lid of your printer? The new hinged lid is easy to open and close with one hand and eliminates the need to set it aside.
In general, the printer is only 1/4 taller when the lid is opened, which saves more space in height. The orange tint of the lid can block 99.89% of ambient UV light for minimal interference with the resin in the tank.
smart air purifier
Powered directly by the printer, the air purifier includes a replaceable activated carbon filter that is 5.8 times larger than others. It will eliminate the stink of resin effectively, so you can print at night without leaving the windows open.
smart resin pump
The HALOT-MAGE PRO features a smart resin pump for automatic resin filling and extraction. You can refill or recover 1 liter of resin in half an hour. This means less manual handling and a great reduction in splashes and stains. The feeding tube can be freely drained into any container of your choice.
Printers aside, the ecosystem is also an integral part of a great user experience, and Creality has gone the extra mile on this front.
In terms of slicing software, Creality offers self-developed HALOT BOX which has a simpler workflow and includes many presets. MAGE series is also compatible with other cutting software, and with HALOT-MAGE PRO, you will get one year CHITUBOX Pro VIP subscription for free.
In terms of printer control, users can easily manage dozens of HALOT MAGE PRO using the multi-printer control function of HALOT BOX or Creality Cloud.
To complement these new products, why not combine your MAGE series with the Creality Wash and Cure Station, High Speed Release Film, Creality Rapid Resin, Creality 8K High Precision Resin, for
get optimal performance? Why not!
FYI, here’s a quick comparison between HALOT-MAGE PRO and HALOT-MAGE to help you decide which printer you’d like.
The MAGE series is now available at the official Creality online stores.
You can find the local Creality sites specific to your country in the conveniently organized list of links below.
US, EU, DE, UK, AU, CA
US, EU, DE, UK, AU, CA
Or if you want to browse their other offerings, you can visit the official Creality Global Store website, right here.
Come and tell us your opinion on our Facebook, Twitterand LinkedIn Pages, and don’t forget to sign up for our weekly Additive Manufacturing newsletter to get the latest stories delivered straight to your inbox.
Leave a Reply