Jobsite table saws are a little bit larger than the benchtop models, during operations, they are usually placed on a stationary or folding stand. The portable jobsite table saws are used mostly by carpenters, contractors, and tradesmen on the jobsite and that is why it is called “portable jobsite table saw”.
In your search for the best portable jobsite table saw in 2019, keep in mind that jobsite saws are usually less expensive than benchtop saws and cabinet table saws, usually within the range of $300-$600. Most of the saws that fall in the category of portable jobsite table saws may not look like much because of their small construction but in reality, they have powerful amp universal motors.
Jobsite table saws are relatively lightweight therefore they can be moved from one job location to the other with ease as opposed to contractor table saws that are mostly stationary. Many jobsite table saws have rugged builds because of the nature of their functions. They are also, most of the time more accurate than the entry level benchtop table saw models.
Also, the motors, the gears and the cases of a portable saw are normally made to further overcome the hardship and the abuse they usually go through in construction sites. Many jobsite saws have ¾ inch miter slots, better fences, great overall alignment, sliding extension tables, a larger rip capacity and folding stands with wheels compared to bench top saws.
THINGS TO PUT INTO CONSIDERATION WHEN ON THE MARKET FOR A PORTABLE JOBSITE TABLE SAW.
As a woodworker in search of his tool, having to decide on the exact portable saw can sometimes be a huge headache as there are so many products out there on the market and such a wide range of options.
Therefore, it is important that you are equipped with basic knowledge on portable saws so that you can make the right decisions on the right product you get depending on the features of the products.
Here are some important features you should consider when you want to make your purchase. These factors play great roles in the normal functioning of your portable saw.
1. THE WEIGHT
If you are shopping for a table saw, then you should put the weight into consideration. It is better that you opt for a portable table saw that is relatively lightweight but at the same time, sturdy.
This way, you would be sure to complete your work faster and have it more efficiently done compared to when using heavier options. Being lightweight also reduces the strain that is likely to occur while using this tool and also stress involved in moving it from one place to the other.
And while in search of lightweight portable saws, try not to let your decision affect the stability of the tool. If your portable saw is not sturdy enough, it can easily get wobbly and all shaky while working on wood and other material and this could be really risky. Woodworking is all about precision and precision requires stability.
2. EASE OF USE
Ease of use or convenience is also another important feature that must be considered when in the market for the best jobsite table saw. It is important to know that whatever tool you are getting must be something that can be carried easily, be easily fixable and that can also be efficiently used whenever you want to use it.
Another thing that should also be put into consideration is whether the tool can be maneuvered. Either you are setting it up or fixing the wood in place, you have to make sure that the table saw you take home with you is convenient and easy to use in all situations and at every location.
3. THE RPM
RPM means rotation per minute. When you are in the market for an ideal jobsite portable saw, it is important to put into consideration the rotation per minute. Having a high RPM is essential in order to guarantee you efficient and accurate cuts when working with wood or other materials. A tool with high RPM guarantees easy adjustment, that is, the thickness can be adjusted easily and you can get the material you are working on to the level of thickness that you desire. Having a high RPM also makes sure you make relatively smooth cuts and that the rips do not come out in the form of uneven edges.
On the average level, most table saws have a 15 amp motor. It is the RPM that distinguishes the table saws in their performances. Anything that is above 4500 will definitely do.
4. THE SMOOTHNESS AND ACCURACY
Another important factor you have to take into consideration is how smoothly your tool works and how accurate it is. When making your choice, you need to make sure that you pick a table saw that has a blade that can cut easily into any type of wood.
The fence has to be able to securely hold down the wood. Having a miter gauge also adds to the overall accuracy of the tool and significantly increases the range of options of the things you can do with the saw.
5. THE POWER
When out for the best portable saw, it is only natural that you go for the one with the highest horsepower. A table saw that does not have sufficient horsepower will not be really helpful in completing your projects. On average, a motor 0f 1 to2 hp will cut through a 2-inch-thick wood with ease.
For a wood that is any thicker, then you will need to go for table saws that have higher horsepowers. For instance, if you are working on a wood that says, 3 inches thick, you are going to need a 3 to 5 hp motor that would run on 240 volts.
6. DRIVE TYPES
Another factor that you should consider when out for a portable table saw is the drive type as this decides the smooth and efficient running of the saw. Generally, there are two types of drive. There is;
In a direct drive, the blade is connected directly to the motor therefore the motor can transfer all its power directly to the blade. There is practically no power loss in this process. The direct drive has much lesser vibration and noise compared to a belt drive. They are relatively small and lightweight. They are also safer to use and cost less than a belt drive. But then, if you are running big operations, you should go for a belt drive.
The belt drive, as the name indicates, has a V-belt and a pulley system through which power is passed. This drive is more suitable for heavy duty sawing jobs given that they have higher torque and power, they provide greater efficiency when cutting through thicker woods and other variants.
The belt drive also throws up much lesser dust and debris since the motor is mounted far away from the blade. But apart from that, they are not as safe and cost more. If you are doing small jobs then it is advised you use a direct drive otherwise, you opt for a belt drive.
7. THE SAFETY FEATURES
Naturally, portable table saws are among the most dangerous tools to operate, if you are not very careful, you can get hurt very easily. Therefore, it is very important that you consider safety features when looking to buy a portable jobsite saw.
You should keep an eye out for things like anti-kickback pawls and blade tilts as these features go a long way in preventing accidents.
Most of them also feature a magnetic switch that ensures that the machine does not accidentally come on by itself. The magnetic switch is very important. Do not even think of buying a saw that does not have one.
8. THE BLADE TILT
To be on the safer side when using a saw, it is better to go for the left tilt blade, as this is featured prominently on the list of safety features for a table saw.
Compared to right blade tilt, left blade tilt produces fewer kickbacks making it safer for you when operating the jobsite saw. Considering this should definitely be on the list of priorities.
9. THE FLESH SENSOR
It is also really important to put into consideration the flesh sensor when you are planning on purchasing a portable jobsite saw as this is another safety measure that is of utmost importance.
While most of the table saws out there that possess this feature are more expensive, s the saying goes, health is wealth. The flesh sensors will immediately stop when it comes in contact with the blade leading only to a minor cut instead of a fatal accident.
After everything, whatever you come up with should be the right mix of quality, performance, price, availability, and brand in one product.
In this article, we have come up with 5 portable jobsite table saws that have all these features in order to make it easier for you to make your pick.
Below is the table which shows the top 5 best portable jobsite table saws in 2019. Each and every saw is chosen by our specialist reviewers:
1) DEWALT DWE7491RS – THE BEST BUDGET PORTABLE JOBSITE TABLE SAW
The DEWALT DWE7491RS is a versatile and efficient portable jobsite saw. It cut through wood with high efficiency and has some amazing safety features like the blade guard and it also has a push stick. All in all, using this saw makes work quite safe and completely hassle free.
This portable saw is also quite reliable, Dewalt is a popular and fairly dependable brand among the sea of table saw manufacturers. This is the best budget portable jobsite saw because it has an affordable price despite its pretty powerful motor and the fact that it has a large rip capacity. The DEWALT DWE7491RS features a big rolling stand that makes it more convenient to use. It makes quick cuts through over 3 inches depth at 90 degrees and nearly 2.25 at 45 degrees. It has a powerful motor of 15 amp. It can be used to make narrow strips of wood as well as large chunks.
This saw is very lightweight, therefore it can be moved easily from site to site. This saw also has a unique dust collection system that captures dust both below and above the blade. This way, you have a clean and sawdust free work environment while also saving time. The safety feature and its ease of use add to its convenience element.
In addition, this product comes with a 3-year warranty which is quite good for a tool of its class.
- A 15 amp high torque motor.
- No load speed.
- Large rolling stand.
- Incredible dust collection system.
- Satisfactory safety features.
2) Bosch 4100-10 – BEST JOBSITE PORTABLE TABLE SAW FOR EASE OF USE
The Bosch is a pretty good manufacturer that has a long legacy of manufacturing great tools for generations. The Bosch 4100-09 won’t make you disappointed. It is a little bit heavier than the Dewalt DWE and it comes with an innovative stand that makes it stand out among others in the same category.
This saw has a gravity rise stand that reduces the setup time of this table by quite a lot thereby making the user save a lot of time in completing his project. This portable jobsite saw also features pneumatic wheels that can be rolled on almost any surface without having many problems.
It is also equipped with an advance T-slot miter gauge. With this, you are assured accurate cuts every time without any failure.
This product is highly durable and very sturdy. Although it is an expensive product, it is actually very valuable and of top-notch quality. It can be used for any project and if you are aiming for the convenience that the gravity rise system stands for, then you should definitely purchase this unit.
- An innovative, gravity-rise, collapsible table saw stand.
- A SquareLock rip fence.
- Large cutting table surface area.
3) DEWALT DW745 – THE BEST PORTABLE JOBSITE TABLE SAW (TOP PICK) FOR THE MONEY
When considering the product that gives you the value for your cash, the DEWALT DWE745 is the best on the market. It does not matter if you are a beginner or a professional, the DWE745 is a viable portable jobsite table saw that you can definitely invest your money into.
This can also be considered as essential for beginners in the woodwork sector, as it does not have a rip length, that would most likely be required if you are going to be doing a professional job.
Apart from that fact, the DWE745 is a really great portable jobsite table saw. This unit is lightweight and can be moved easily from one jobsite to another.
It features a pro guarding system that basically allows users to make quick and easy adjustments while working with the saw. It also comes with a roll cage that helps make it more durable. In addition, it comes furnished with built-in storage which is actually very useful. For its price, it already has a lot of features.
Therefore, if you are in the market for portable jobsite table saws and you do not have any need for maximum capacity when it comes to making rip length cuts, then it is highly advisable that you go for this saw as it is a great budget option.
And on the plus side, it also comes bearing a 3-year warranty. this is awesome for a budget portable jobsite table saw.
- Steel roll cage.
- Powerful 1850 watt motor.
- 15 amp motor.
- Rack and pinion fence rails.
- Telescopic fence rails.
4) SKILSAW SPT70WT-01: BEST PORTABLE JOBSITE TABLE SAW FOR PROFESSIONALS
The SPT70WT-O1 is the world’s first worm drive table saw. This saw is made for ripping. it features the SKILSAW popular worm drive gearing that provides the utmost torque and power for ripping through even the toughest material without breaking down.
This unit comes with a great 15 amp motor that powers and keeps the motor cool even when making repeated cuts. This machine can rip full sheets of plywood and up to 4x of material as the saw has a 25 inches rip capacity and a 3 ½ inch depth of cut. With this saw, the user can make accurate cuts with its self-aligning rip fence and a bevel that is easily adjustable and can go from 1 degree to 46 degrees for true cutting.
This table saw is constructed for the rugged demands of a jobsite as it has a durable all steel roll cage and a die cast aluminum top. The mechanism that raises and lower the blade is constructed from metal in order for it to withstand extreme temperatures without breaking.
The 49 lb saw is lightweight for easy movement from your truck to the worksite. This saw can be picked up with one hand using its rubberized padded handle while using the other hand to carry other tools or the stand.
- A 15-amp solid construction Dual-Field Motor.
- 25-inch rip capacity and 3 ½ inch depth cut.
- A self-aligning rip fence.
- Portable but lightweight compact.
5) ROCKWELL RK7241S PORTABLE TABLE SAW – BEST PORTABLE JOBSITE TABLE SAW FOR WOODWORKING
The Rockwell RK7241S is a great saw that can be used very easily both by professionals and beginners. This portable saw is really lightweight and at the same time incredibly powerful.
This saw also delivers an awesome cutting depth. It has a folding fence in order for the operator to make wider cuts. It also features a laser indicator system that guides the blade tilt so that the user can make level and precise cuts. Also with this unit, comes fully assembled trolley that ensures that the saw can be moved around conveniently from jobsite to jobsite. This table saw encompasses lots of features for a table saw its size.
It’s considered by some experts as the Largest cutting depth of any saw in class. It also has an exclusive laser indicator adjusts to blade tilt for a precise cut. The Fold out fence for maximum rip capacity and extra-wide cuts is another amazing feature to reckoned with. It also has a fully assembled trolley stand for increased portability. A quick-folding stand and wheels for easy transportation.
- A high cutting depth.
- A folding fence.
- Laser guide for the table.
- Rip capacity of 30 inches.
We hope that after having pointed out the best 5 portable table saws on the market, for their top qualities, incredible features and affordable enough prices all bunched up in each of these machines, We are certain than you make the best choice in the market by taking home the best that is well suited to your needs.